All of the ionization blow off guns from ElectroStatics,
work with compressed air or Nitrogen.
( All static control blow off guns come with 8'(2.4m) of cable.
Up to 20' (6 m) available at additional charge)
The 190M Gun is specifically designed and manufactured
to meet stringent
clean room (<class 100 or ISO 3-4) operating conditions while reducing
static electricity at
the work station. The 190M should only be used with dry nitrogen or
extremely clean air.
The nozzle assembly is a specially designed housing containing
a 0.45 micron, non-absorbing, replaceable filter between two rigid
steel screens. "O" rings prevent any possibility of particulate bypassing
the filter. The housing containing the filter and ionizing point is
constructed of stainless steel and molded Teflon parts. This unique
design eliminates any possibility of contamination from the gun itself
passing through to contaminate the product. The filter is not designed
to clean/ filter the pressurized
air or inert gas but to capture any contamination that may come from
the gun itself. Filter
replacement on the gun is quick, easy and requires no tools.
The Model 190C Ionizing Gun is specifically
designed for neutralizing static and removing surface contamination
for applications in rooms class 100 or ISO 3-4 or higher and general
applications. For example, cleaning plastic parts prior to assembly,
cell phone repair, fiber optics, neutralizing nonconductive components
prior to their assembly into a printed circuit board.
The Model 190 HP Ionization Gun is highest volume
ionization gun on the market. The 10 to 1 boost from the venturi also
makes The 190 HP a very energy efficient static control blow off gun.
The 190 HP is an excellent ionization blow off gun for applications
with: a large coverage area such as fiberglass panels; drying of circuit
boards, cooling requirements. Air flow requirements with 0.25 fittings
@ 20 PSI 3 CFM; @ 50 PSI 4.5 CFM; @100 PSI 6 CFM
The CPS Ionizing Air Gun is a high-performance
designed to simultaneously neutralize static charges and remove electrostatic
bonded particulate from surfaces. The CPS Gun provides a pinpoint,
air stream ideal for cleaning, medical components, instruments, molded
parts, photographic film, glass and other electrostatic charged
The HPS-III Hands Free Ionizing Air Gun is is designed to offer the
operator the ease of use without having to hold the gun. The HPS-II
hands free provides a pinpoint, ionized air stream ideal for cleaning,
medical components, instruments, molded parts, cell phone repair, photographic
and other electro statically charged components. The foot switch controls
air flow to the gun. The goose neck assemble if easily adjustable to
point the nozzle in the desired direction.
All powered static bars, guns and nozzles require the
"T Series" Unit (to the left). These rugged power units automatically
provide optimum performance never requiring adjustments. Two (2) bars,
nozzles or guns can operate from one power unit. Where sensitive electronic
components require the use of guns or nozzles, it is recommended the
"B" Series (Balanceable Power Units) be used. With this unit, equal
ion (5 v +/-) is assured. the "B" series power supply can
power one gun.